1～14 件を表示 ／ 全 14 件
Light-type active sensor DA-1100-24C
■Features ● Can be used for unlocking electric locks. ● Ceiling-mounted light sensor. ● Almost unaffected by indoor wind, sound, or temperature changes. ● Equipped with a self-diagnosis function to determine abnormalities in the sensor itself. ● A high-density area arranged in 4 rows with 6 detection patterns per row.
Sensor for activating the sheet shutter with only necessary functions at a mounting height of 3.2m.
■32 detection spots can be set The sensor has 32 detection spots, and it is possible to erase them by row. ■Stationary object detection time setting Settings for ∞ seconds, 60 seconds, 10 seconds, and 2 seconds are available. The configurable rows are 1 and 2. Rows 3 and 4 are fixed at 2 seconds. ■Area adjustment The depth area can be set to 4 rows, 3 rows, 2 rows, or 1 row using dip switches. The width area can be set for the left and right using area masks. ■Environmental settings It is possible to reduce false triggering caused by snow, rain, insects, and vibrations from the installation area during shutter opening and closing. There are four levels: normal, level 1, level 2, and level 3. ■Interference settings If there is a risk of interference between nearby sensors, it is possible to configure the sensors to have different settings.
High-altitude installation type (recommended height 3m to 6m) capable of covering large doors, achieving a high-density detection pattern (4 rows/24 beams).
■High-altitude installation type capable of long-distance detection With a maximum installation height of 6m, it is ideal as a sensor for large factory doors and sheet shutters, allowing for long-distance detection. (Recommended installation height: 3m to 6m) ■Arrangement of high-density detection patterns An area of four rows in depth, including right in front of the door, has been arranged, with each row having six zones, ensuring that intruders from the side of the door or people standing near the door rail are reliably detected. ■Microcontroller-based control system ●Limited stationary detection Can be set arbitrarily from "2 seconds / 15 seconds / 60 seconds / 180 seconds." ●Interference prevention function Even if multiple sensors are installed in narrow areas such as airlocks, the infrared frequency can be switched, preventing mutual interference. ■Outdoor installation capable Achieves IP55 waterproofing suitable for outdoor use. ■Adjustable to any angle Thanks to the swivel mechanism, angle adjustments can be made freely, allowing for the optimal detection area to be set. Additionally, the optical area can be switched to three patterns based on the installation location using dip switch settings.
This one unit is sufficient for a 6m square sheet shutter! (Can be installed up to 6.5m)
■Wide-area and high-density detection patterns Five-column areas, including just before the shutter, have been arranged, with each column featuring 12 high-density pattern areas (a total of 60). The installation height can reach up to 6.5 meters, achieving a wide detection area. (Optical area: Height 6.5m × Width 6.9m × Depth 4.2m) ■Direction discrimination function By setting the direction discrimination function, unnecessary opening and closing of the shutter can be reduced. The directionality can be selected from the following four patterns: 1. All-direction detection 2. No detection of lateral entry 3. No detection of exit from the shutter side 4. No detection of exit from both lateral and shutter sides ■Malfunction reduction function By combining the new insect mode and environmental countermeasures function, malfunctions caused by environmental changes such as dirt on the ground, snow, and insects can be reduced. ■Shutterway function By using the separately sold wedge-shaped base (part number WD-6500), a detection area setting for the shutterway (negative side) can be established, enhancing safety.
A new ceiling sensor design that does not compromise aesthetics, achieving a flat integration through a pull-down method.
■High-Density Infrared Area The detection area has achieved a high-density wide area with 72 spots. ■Adjustable Area Both the stepping and wide areas can be erased one row at a time, allowing for optimal fine area adjustments. ■Mode Switching Function The eco mode function reduces unnecessary opening time of automatic doors. ■Operation Confirmation Function The use of full-color LEDs makes operation confirmation easy. ■Easy Installation The industry's first pull-down method has achieved a flat, cohesive design that preserves the aesthetics of the ceiling. It has realized a flattening of approximately 10mm compared to conventional products.
New design that reduces protrusion during installation without eyes.
■Achieves a maximum installation height of 4m without a target Even with high doors of 4.0m, it is possible to create an open entrance while maintaining safety with the doorway monitoring function. It can also accommodate entrances to industrial facilities. ■Industry-leading 60 spots Maintaining a high-density area of 60 spots at installation heights from 2.0m to 4.0m reduces the risk of contact with doors due to rushing into the entrance or diagonal entry. ■Equipped with ECO mode function! It can reduce unnecessary opening time of automatic doors. ■Easy operation confirmation with 7-color LED In detection range confirmation mode, the color of the displayed LED changes for each detection row, allowing for area measurement and identification of rows experiencing malfunctions. During monitoring, the presence or absence of snow and insect mode settings can be identified by color. ■Improved area fine-tuning function Adjustment is possible for each row in width and depth, allowing for precise detection areas tailored to the site while maintaining high density.
Maximum installation height of 3.6m with ECO function. Settings are done via smartphone or tablet.
■Up to 72 detection spots can be set You can set the 72 detection spots of the sensor into four groups, and you can also change one detection spot to a non-detection area. In the four groups, you can individually set sensitivity, hold time, output time, and noise environment. *Settings are done using a smartphone or tablet. ■Function settings can be done with a smartphone Various settings for functions and sensors are performed via Wi-Fi communication using a smartphone or tablet with Android 2.2 or higher installed. (Please download the dedicated app from our website.) This makes work at heights safer, as only the installation of the equipment is required. (A separate setting unit, DSY, is required for configuration.) ■Eco function Detection is not activated in the horizontal direction, while detection occurs in the direction towards the sensor. Additionally, the output time is shorter in the direction away from the sensor, reducing unnecessary openings and closings. ■Output settings Output can switch between contact a and contact b, and in the case of contact b, it operates in fail-safe mode (open during power failure).
The optical area can individually set 72 spots to detect or not detect.
■72 optical spots can be set You can set 72 optical spots individually for detection and non-detection, allowing for area surveillance settings that suit the site. Additionally, detection spots can be divided into 4 groups, each with adjustable sensitivity and output time settings. ■Settings via dedicated software The settings for the main unit are performed by connecting it to an optional (sold separately) setting unit DSY and a device such as a smartphone or tablet running Android 2.2 or higher with a dedicated app installed, via Wi-Fi. The detection status can be viewed in real-time, ensuring accurate area settings. There is also no need to work at heights. (Please download the dedicated software from our website.) ■Interference prevention feature With four interference prevention modes, the same sensor can be installed in close proximity without causing malfunctions. ■Environmental settings Environmental settings can be configured in up to four levels, which helps reduce false detections caused by snow, insects, and other factors.
Slim, unframed sensor narrowed down to essential functions only.
■32 detection spots can be set The sensor has 32 detection spots, and it is possible to erase them by row. ■Static object detection time setting Settings can be made for 2 seconds, 10 seconds, 60 seconds, or infinite. The configurable rows are 1 and 2. Rows 3 and 4 are fixed at 2 seconds. ■Thin design with a sensor thickness of 28.5mm With a thickness of 28.5mm, the risk of the sensor coming into contact with the shutter when closing is reduced in environments where electric shutters are used. ■Environmental settings It is possible to reduce false triggering due to snow, rain, insects, and vibrations from automatic door opening and closing. There are four levels: normal, level 1, level 2, and level 3. ■Interference settings If there is a risk of interference between closely positioned sensors, it is possible to set them to have different configurations.
High-performance sensor with doorway monitoring function compatible with installation height of 4m without a blind spot.
■Supports installation heights from 2 to 4 meters Equipped with a doorway monitoring function, it supports installation heights from 2.0 to 4.0 meters. ■Improved detection range adjustment function The width and depth can be finely adjusted for the detection range, allowing for adjustments to the detection area according to the installation environment. ■Industry-leading 60 spots With an industry-leading 60 spots, it maintains a high-density detection range even when installed at high locations, enhancing safety. ■Enhanced environmental and insect countermeasures With three levels of "environmental countermeasures" and insect countermeasure functions, we have further strengthened measures against malfunctions caused by snowfall and flying insects. Additionally, using the automatic environmental countermeasure setting function, it automatically switches to environmental countermeasure mode when temperatures predict snowfall, reducing malfunctions caused by snow. *When environmental countermeasures are set, the level of environmental countermeasures automatically increases by one level at low temperatures. ■Status indication with 7-color LED The 7-color LED display allows for checking the setting status (snow/insect mode) and identifying malfunctioning rows based on detection range confirmation mode. ■User-friendly design ● Equipped with mutual interference prevention function to prevent malfunctions caused by interference with adjacent sensors (6 frequencies). ● Includes a self-diagnosis function to assess infrared emission capability.
New design that reduces protrusion during installation without a target.
■Achieves a maximum installation height of 4m without a target Even with a high door of 4.0m, it can maintain safety with the doorway monitoring function while providing an open feeling at the entrance. It can also accommodate entrances to industrial facilities. ■Industry-leading 60 spots Maintaining a high-density area of 60 spots at installation heights from 2.0m to 4.0m reduces the risk of contact with doors during rushes into the entrance or diagonal entries. ■Equipped with ECO mode function! It can reduce unnecessary opening time of automatic doors. ■Easy operation confirmation with colored LEDs In detection range confirmation mode, the color of the displayed LEDs changes for each detection row, allowing for area measurement and identification of rows experiencing malfunctions. During monitoring, the presence or absence of snow and insect mode settings can be identified by color. ■Improved area fine-tuning function Adjustment of width and depth by one row each is now possible, allowing for precise detection areas tailored to the site while maintaining high density. ■Enhanced measures against malfunction due to snow Snow mode is divided into three levels, strengthening malfunction countermeasures compared to conventional products and reducing sensitivity decline.
High-performance light beam active sensor optimal for activating sheet shutters up to 4.5m in size.
- Compatible with installation heights of 2 to 4.7 meters and equipped with shutterway monitoring function. It supports installation heights from 2.0 to 4.7 meters with the shutterway monitoring function. - Improved detection range adjustment function. It allows for detection range adjustments one column at a time in width and depth, enabling area adjustments to suit the installation environment. - Industry-leading 60 spots. With an industry-leading 60 spots, it maintains a high-density detection range even when installed at high locations, enhancing safety. - Strengthened environmental and insect countermeasures. The "environmental countermeasures" feature has three levels, and the "insect countermeasures" function further enhances measures against malfunctions caused by snowfall or flying insects. Additionally, using the automatic environmental countermeasure setting function, it automatically switches to environmental countermeasure mode when the temperature reaches a level where snowfall is predicted, reducing malfunctions caused by snow. *When environmental countermeasures are set, the level of environmental countermeasures automatically increases by one level during low temperatures. - Status indication with 7-color LED. The 7-color LED display allows for confirmation of the setting status (environmental countermeasures and insect mode) and enables the identification of malfunctioning columns through the detection range confirmation mode.
This single unit is sufficient for a 6m square sheet shutter! (Can be installed up to 6.5m)
■Wide-area and high-density detection patterns Five-column areas, including just before the shutter, have been arranged, with each column featuring 12 high-density pattern areas (a total of 60). The installation height can reach up to 6.5 meters, achieving a wide detection area. (Optical area: height 6.5m × width 6.9m × depth 4.2m) ■Direction discrimination function By setting the direction discrimination function, unnecessary opening and closing of the shutter can be reduced. The directionality can be selected from the following four patterns: 1. All-direction detection 2. Non-detection of lateral entry 3. Non-detection of exit from the shutter side 4. Non-detection of exit from both lateral and shutter sides ■Malfunction reduction function By using the new insect mode in conjunction with environmental countermeasures, malfunctions caused by environmental changes such as dirt on the ground, snow, or insects can be reduced. ■Shutterway function By using the separately sold wedge-shaped base (model number WD-6500), a detection area setting for the shutterway can be established, enhancing safety. ■Detection area setting function The depth area can be set from 5 columns to 1 column, and the width area can be independently adjusted left and right, allowing for the deletion of detection areas in the outer two spots, enabling detailed area settings tailored to the site.
The automatic door opens when you hold your hand over it. A touchless feature with a non-contact sensor!
■Equipped with Touchless Function By pinpointing the activation area of the sensor above the automatic door to the door plate, it can simulate the function of a touch switch. When you bring your hand close to the automatic door plate, the sensor detects it and opens the door, allowing you to open the door without contact (touchless). ■Reduce Malfunctions of Automatic Doors with Detailed Detection Area Settings Touchless detection area settings can be configured in four ways: central, left, right, with four spots each, totaling twelve spots. It is compatible with sliding doors and left/right single sliding doors. The door will not open when approached from the side, which effectively reduces unnecessary opening and closing of the automatic door. ■Can Also Be Used as a Standard Non-Contact Sensor By switching the dip switch, it can also be used as a conventional activation non-contact sensor. ■Available Cover Colors The cover colors available are S Silver, B Bronze, W White, BL Black, and ST Stainless Steel.
